Date：2026-11-04
Mutto’s 3-in-1 plastic bottle filling machine is designed for bottling purified water, non-carbonated beverages, juice, tea, milk, and nutritional drinks. It integrates three processes—bottle rinsing, filling, and capping—and supports PET, HDPE, and PP plastic bottles. Depending on the configuration, the machine can reach a maximum capacity of 36,000 bottles per hour.
A 3-in-1 plastic bottle filling machine can be used for various non-carbonated beverages, ranging from bottled drinking water to nutritional drinks.
For milk, nutritional drinks, and products requiring hot filling or sterilization, manufacturers need to determine the filling temperature and hygiene requirements before selecting the machine configuration. For juice containing pulp, products with sediment, or liquids with high viscosity, Mutto needs to assess the product characteristics to determine a suitable filling solution.
A 3-in-1 filling machine integrates three processes—bottle rinsing, filling, and capping—into a single machine.
The operating process consists of:
Bottle rinsing: Bottles are transferred to the rinsing section for cleaning before filling.
Filling: The product is filled into bottles using the gravity return filling method.
Capping: Filled bottles are transferred to the capping section to complete the packaging process.
Integrating these three processes reduces the number of standalone machines and minimizes bottle transfers between separate units. The processes are arranged in sequence to support continuous production.
The 3-in-1 filling machine can be configured to handle PET, HDPE, and PP bottles.
When selecting the equipment, manufacturers should consider the following packaging characteristics:
Bottle material: PET, HDPE, PP.
Bottle specifications: 20/25/30/50 mm. Mutto can also design and adjust the machine to suit the customer's packaging requirements.
Bottle shape: Bottles, tubes, or customized designs.
These factors affect the design of bottle holders, conveying mechanisms, and capping heads. Therefore, manufacturers should provide samples of the bottles and caps they intend to use so Mutto can evaluate them before proposing a machine configuration.
The 3-in-1 plastic bottle filling machine has a maximum capacity of 36,000 bottles per hour and uses a PLC control system and inverter.
Note: The maximum capacity depends on the machine configuration and operating conditions. Bottle specifications, the applicable scope of stainless steel 304/316, and other technical details should be confirmed based on the customer's specific requirements.
A 3-in-1 plastic bottle filling machine integrates three bottle-processing operations into one unit, helping manufacturers optimize their production layout.
Key benefits include:
Fewer standalone machines: Rinsing, filling, and capping are performed by the same machine.
Reduced floor space: Three processes are integrated instead of being arranged as separate machines.
Fewer bottle transfers: Bottles move continuously through the machine's processing sections.
Packaging flexibility: The machine can be configured according to bottle material, capacity, shape, and cap type.
To select the right equipment, manufacturers should identify the beverage type, product characteristics, bottle samples, and target production output before finalizing the machine configuration.
It can be used for various non-carbonated beverages. However, when changing products, manufacturers should consider hygiene requirements, ingredient characteristics, and filling conditions to determine whether the same machine configuration can be used.
The machine can be evaluated for milk-filling applications, but the product temperature during filling and the process hygiene requirements must first be determined. For fresh milk or products requiring specific filling conditions, manufacturers should consult Mutto's technical team before selecting the machine.
Yes. Changes in bottle capacity, height, body diameter, or cap type may require adjustments to the corresponding machine components. The extent of adjustment depends on the machine design and the range of bottles covered by the original configuration.
It can be designed to connect with upstream and downstream equipment. The layout should take into account the factory floor plan and the output capacity of each machine to support continuous operation.
Manufacturers should prepare the following information:
Beverage type and product characteristics.
Bottle capacity, shape, and material.
Cap samples or cap specifications.
Target production output per hour or per shift.
Filling temperature and hygiene requirements, if applicable.
Actual samples of the product, bottles, and caps help the technical team evaluate the requirements more accurately before proposing a machine configuration.
Mutto’s 3-in-1 plastic bottle filling machine integrates rinsing, filling, and capping for various non-carbonated beverages in PET, HDPE, and PP bottles. To select the right equipment, manufacturers should identify their product characteristics, bottle specifications, and target production output. Contact Mutto to discuss your requirements and provide product and bottle samples for a suitable machine proposal.
MUTTO (VIETNAM) MACHINERY EQUIPMENT COMPANY LIMITED
Address: 26-28-30 Street No. 7, Conic Residential Area, Hamlet 5, Binh Hung Commune, Ho Chi Minh City, Vietnam
Hotline: (+84) 917552177
Email: info@mutto.com.cn
Website: https://en.mutto.com.cn/
Facebook: https://www.facebook.com/MuttoFillingSolution/
Instagram: https://www.instagram.com/muttofillingsolution/
LinkedIn: https://www.linkedin.com/company/mutto-filling-solution/
Mainland China Region： Add：Building 6, No. 314 Shenxia Road, Jiading District, Shanghai
Tel：021-69896938
Vietnam Office： Add：26-28-30 Street No.7, Conic Residential, HoChiMinh City , VietNam
Tel：+84 917552177
Email： Email：info@mutto.com.cn
版权所有@2026牧东机械制造（上海）有限公司技术支持：撼云网络
CN
EN
VI
